Getting
Making Detailed Settings (Manual Setup)
Setting items | Setting contents |
Setting items | Setting contents |
Connections Started
232C Port
Set when using an external controller or
Serial Control : Set when using an external controller.
2Way Remote : Set when using a
When using a DENON
NOTE
Firmware Update
Update the firmware of the receiver.
Check for Update : You can check for firmware updates. You can also check approximately how long it will take to complete an update.
Start : Execute the update process.
When updating starts, the power indicator becomes red and the GUI screen is shut down. The amount of update time which has elapsed is displayed.
Specifications Troubleshooting Information Control Remote
|
|
| When setting to “2Way Remote”, you can not use the |
|
|
| as an external controller. |
Dimmer |
|
| Bright : Normal display brightness. |
Adjust display brightness of | Dim : Reduced display brightness. | ||
the receiver. |
| Dark : Very low display brightness. | |
|
|
| OFF : Turns the display off. |
Setup Lock |
| OFF : Turn protection off. | |
Protect | settings | from | ON : Turn protection on. |
inadvertent change. |
|
| |
•When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt to operate related settings.
|
|
| ·GUI menu operations | ·Dynamic Volume | |
|
|
| ·RESTORER | ·Channel Level | |
|
|
| ·Audio/Video Adjust | ·Audio Delay | |
|
|
| ·MultEQ XT | ·Input Mode | |
|
|
| ·Dynamic EQ |
| |
|
|
| • When canceling the setting, set “Setup Lock” to “OFF”. | ||
Maintenance Mode | NOTE |
| |||
Used | when | receiving |
| ||
Only use this function if so instructed by a DENON serviceperson or | |||||
maintenance from a DENON | |||||
service engineer or custom | installer. |
| |||
installer.
When updating is complete the power indicator becomes green and normal status is resumed.
b If updating fails, the set automatically retries, but if updating is still not possible, one of the messages shown below is displayed. If the display reads as shown below, check the settings and network environment, then update again.
Display | Description |
Updating failed | Updating failed. |
Login failed | Failure to log into server. |
Server is busy | Server is busy. Wait a while then try again. |
Connection fail | Failure connecting to server. |
Download fail | Downloading of the firmware has failed. |
Add New Feature |
| Upgrade : Execute the upgrade process. | |
Display | new features | that | When updating starts, the power indicator becomes red and the GUI |
can be | downloaded to | the | screen is shut down. The amount of update time which has elapsed is |
displayed. | |||
update. |
| When upgrading is complete the power indicator becomes green and | |
normal status is resumed.
b If the upgrade is not successful, an error message identical to those in “Firmware Update” will appear on the display, check the settings and network environment, then update again.
Upgrade Status : A list of the additional functions provided by the Upgrade will be displayed.
See the DENON website for details about updates.
When the procedure is complete, “Registered” is displayed in this menu and updates can be carried out. If the procedure has not been carried out, “Not Registered” is displayed.
The ID number shown on this screen is needed when carrying out the procedure.
The ID number can also be displayed by pressing and holding p and STATUS on the main unit for at least 3 seconds.
56 | Main remote control unit | :Displaying the menu | :Moves the cursor | :Confirm the setting | :Return to previous menu |
| operation buttons | Cancel the menu | (Up/Down/Left/Right) |
|
|