The power indicator turns off, and so does the power.
The power is set to the standby mode.

Remote zone-Multi Playback Settings Connections Started Getting

Connecting the Power Cord

Wait until all connections have been completed before connecting the power cord.

Connection to the AC outlet

•These outlets supply power to external audio equipment.

•Audio equipment with a total power

consumption of 120 W (1 A) can be connected.

• The power supply turns on and off together with <ON/STANDBY>. When set to “ON”,

power is supplied from the outlet. When set to “STANDBY”, no power is supplied.

Power cord

To household power

(included)

 

outlet

 

(AC 120 V, 60 Hz)

Symbols used to indicate buttons in this manual

Button located on both the main unit

and the remote control unit BUTTON

Button only on the main unit <BUTTON>

Button only on the remote control unit [BUTTON]

<ON/STANDBY> <POWER>

QUICK SELECT

Once Connections areCompleted

Turning the Power On

1 Press <POWER>.

The power indicator lights red and the power is set to the standby mode.

2Press [MAIN] to switch the main remote control unit to “MAIN” mode (vpage 108 “Operating the Main

Remote Control Unit”).

3 Press <ON/STANDBY> or [POWER ON].

The power indicator flashes green and the power turns on.

b Also press [INPUT SOURCE SELECT] or QUICK SELECT when in

standby mode, the power turns on.

When [INPUT SOURCE SELECT] has been pressed, the input source set with the [INPUT SOURCE SELECT] is set. If a QUICK SELECT has been pressed, the input source stored in the

memory for the quick select function is set (vpage 101 “Saving Frequently Used Settings (Quick Select Function)”).

Specifications Troubleshooting Information Control

NOTE

•Insert the AC plugs securely. Incomplete connections could cause noise.

•Only use the AC outlets to plug in audio equipment. Do not use them as power supplies for hairdryers or anything other than audio equipment.

[MAIN]

QUICK SELECT

[POWER ON] [POWER OFF]

[INPUT SOURCE SELECT]

Turning the Power Off

1Press [MAIN] to switch the main remote control unit to “MAIN” mode (vpage 108 “Operating the Main

Remote Control Unit”).

2 Press <ON/STANDBY> or [POWER OFF].

3 Press <POWER>.

NOTE

Power continues to be supplied to some of the circuitry even when the

power is in the standby mode. When leaving home for long periods of time or when traveling, either press <POWER> to turn off the power,

or unplug the power cord from the power outlet.

28