Listening to HD Radio Technology
1Press [SOURCE SELECT] to display the GUI Source Select menu, then select “
” (vpage 31).
2Set the main remote control unit to the “DTU” mode (vpage 108 “Operating the Main Remote Control
Unit”).
Selecting Audio Programs
HD Radio Technology enables stations to broadcast multiple Audio programs and data services on HD2/HD3 channels.
Press ui to select the audio program.
If the station you are listening to has multiple audio programs, “HD1” is indicated on the display. If it only has one audio program, “HD” is indicated.
Tuning in Radio Stations – HD Radio Technology
Listening to Preset Stations
1Press [A ~ G] to select the memory block (A to G).
2Press [CHANNEL] or [1 ~ 8] to select the desired preset station.
Connections Started Getting
3Press [BAND] to select “FM” or “AM”.
4Tune in the desired broadcast station.
qTo tune in automatically (Auto Tuning)
Press [MODE] to select
•The “
” indicator lights on the display when an HD Radio station is tuned in.
•When
•If “AUTO” (tuning mode) is selected, both HD Radio and analog stations are tuned in.
wTo tune in manually (Manual Tuning)
Press [MODE] to select “MANUAL”, then use [TU d] or [TU f].
5Adjust the items below.
n Adjusting the master volume (vpage 85) n Selecting the surround mode (vpage 87) n Adjusting the Sound and Picture Quality
(vpage 90)
•If the desired station cannot be tuned in with auto tuning, tune it in manually.
•When tuning in stations manually, press and hold [TU d] or [TU f] to change frequencies continuously.
•The time (default : 30 sec) for which the GUI menu is displayed can be set “GUI” - “Tuner” (vpage 54). Press uio p to return to the original screen.
Presetting Radio Stations (Preset Memory)
Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset.
1Tune in the broadcast station you want to preset.
2Press [MEMO].
3Press [A ~ G] to select the block in which the channel is to be preset, then press [CHANNEL] or [1 ~ 8] to
select the preset number.
b The memory block can also be selected by pressing [SHIFT] on the sub remote control unit.
4Press [MEMO] again to complete the setting.
•To preset other stations, repeat steps 1 to 4.
•Multicasts can also be preset.
•Stations can be preset automatically at “Auto Preset” (vpage 63).
NOTE
Preset stations are erased by overwriting them.
•You can also operate via the main unit. In this case, perform the
following operations.
Press <TUNING PRESET>, then turn <SOURCE SELECT> to select the preset radio station.
•If an audio program from HD2 to HD8 has been interrupted or if a program is called out using the preset buttons after it has been interrupted, HD1 is automatically selected after about 20 seconds.
nDefault settings
Tuner presets
A1 ~ A8 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /100.1 MHz
B1 ~ B8 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C8 530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
Direct Frequency Tuning
You can enter the receiving frequency directly to tune in.
1Press [SEARCH].
2Input frequencies by means of [0 ~ 9].
b If o is pressed, the immediately preceding input is cancelled.
3 When setting is completed, press ENTER. The preset frequency is tuned in.
Specifications Troubleshooting Information Control Remote
75