Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

Making Detailed Settings (Manual Setup)

Making the Multi-zone Settings (Zone Setup)

Default settings are underlined.

Set the audio to playback with multi-zone (ZONE2, ZONE3).

Setting items

Setting contents

 

 

 

 

 

Bass

 

 

 

–10dB ~ +10dB (0dB)

Adjust low frequency range

 

(bass).

 

 

 

 

Treble

 

 

 

–10dB ~ +10dB (0dB)

Adjust high frequency range

 

(treble).

 

 

 

HPF

 

 

 

OFF : The low range is not attenuated.

Make

settings for

cutting

ON : The low range is attenuated.

the low range to reduce

 

distortion in the bass.

 

Lch Level

 

 

–12dB ~ +12dB (0dB)

Adjust

the

left

channel

The “Lch Level” can be set when “Channel“ (vpage 52) is set to

output level.

 

 

 

 

“Stereo“.

 

 

 

 

Rch Level

 

 

–12dB ~ +12dB (0dB)

Adjust

the

right

channel

The “Rch Level” can be set when “Channel“ (vpage 52) is set to

output level.

 

 

 

 

“Stereo“.

 

 

 

 

Channel

 

 

Stereo : Select stereo output.

Set the signal output from

Mono : Select mono output.

multi-zone.

 

 

When “Amp Assign” - “Assign Mode” (vpage 41) is set to “FREE”,

 

 

 

 

 

 

 

 

and the signal assigned to the power amp is set to “Z2/Z3(M)”, the

 

 

 

 

“Channel” setting automatically becomes “Mono”.

Volume Display

 

Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.

Set

how

volume is

Absolute : Display in the range 0 (Min) ~ 99.

displayed.

 

 

 

• The “Volume Display” setting is applied also to the “Volume Level”, “Volume Limit” and “Power On Level” display method.

• The “Volume Display” setting applies to all zones.

Setting items

Setting contents

Volume Level

Variable : Volume adjustment enabled by main unit and remote control

Set the volume output level.

unit.

 

–40dB(41) : Fix volume at –40 dB. Set when adjusting volume by external

 

amplifier.

 

0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external

 

amplifier.

 

When “Amp Assign” – “Assign Mode” (vpage 41) is set to “+Z2”,

 

“+Z2+Z3”, “ALL Z2” or “ALL Z2+Z3”, the “Volume Level” setting is

 

automatically set to “Variable”.

Volume Limit

OFF : Do not set a maximum volume.

Make a setting for maximum

–20dB (61) / –10dB (71) / 0dB (81)

volume.

Can be set when the multi-zone “Volume Level” setting (vpage 52)

 

 

is “Variable”.

Power On Level

Last : Use the memorized setting from the last session.

Define the volume setting

– – – (0) : Always use the muting on condition when power is turned on.

that is active when the

–80dB~ 18dB (1 ~ 99) : The volume is adjusted to the set level.

power is turned on.

Can be set when the multi-zone “Volume Level” setting (vpage 52)

 

 

is “Variable”.

Mute Level

Full : The sound is muted entirely.

Set the amount of attenuation

–40dB :The sound is attenuated by 40 dB down.

when muting is on.

–20dB :The sound is attenuated by 20 dB down.

52

Main remote control unit

:Displaying the menu

:Moves the cursor

:Confirm the setting

:Return to previous menu

 

operation buttons

Cancel the menu

(Up/Down/Left/Right)