Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

Restoring All the Settings to as They were at the Time of Purchase (Resetting the Microprocessor)

Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values.

<STANDARD> <DSP SIMULATION>

<POWER>

1Turn off the power using <POWER>.

2Press <POWER> while simultaneously pressing <STANDARD> and <DSP

SIMULATION>.

3 Once the display starts flashing at intervals of about 1 second, release the two buttons.

If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.

134