Getting |
| Symbols used to indicate buttons in this manual |
| |||
Button located on both the main unit |
|
| ||||
Started | BUTTON | |||||
and the remote control unit |
| |||||
| ||||||
|
|
| <BUTTON> | |||
Playback
The operating procedure is the same for “q Zone Playback by Speaker Output” and “w Zone Playback by Audio Output (PRE OUT)”.
|
|
| Button only on the main unit | [BUTTON] |
|
Connections |
|
| Button only on the remote control unit |
| |
|
| <ZONE2/3/4 / REC SELECT> <MASTER VOLUME> |
| ||
|
| <SOURCE SELECT> uiop |
|
| |
Settings |
|
|
|
|
|
Playback |
|
|
|
|
|
|
| <ZONE4 ON/OFF> |
|
| |
zone |
|
| <ZONE2 ON/OFF> <ZONE3 ON/OFF> |
|
|
|
|
|
|
| |
Remote |
|
|
| [ | MAIN] |
Control | [ | MAIN] | [QUICK SELECT] | [QUICK | |
|
| ||||
|
|
|
| SELECT] | |
Information |
|
| [ZONE ON] | [ZONE ON] | |
| [SLEEP] |
| [SLEEP] | ||
Troubleshooting |
| [MENU] | [MAIN ZONE ON] |
|
|
| uiop | [MAIN ZONE OFF] |
|
| |
|
|
|
| ||
|
|
| [ | MAIN] | |
|
| [VOLUME] |
|
| |
|
|
|
|
| |
Specifications |
| [MUTE] | [INPUT SOURCE |
|
|
|
|
|
| ||
|
| SELECT] | [ZONE ON] | ||
|
|
| |||
|
|
|
|
| |
1 Turn on the
2Turn on the zone power.
Operation on the main unit
Press <ZONE2 ON/OFF>, <ZONE3 ON/ OFF> or <ZONE4 ON/OFF> for the zone to
be operated.
When the power turns on, the “
”, “
”
or “
” indicator lights on the display.
Operation on the remote control unit
Press [MAIN] to display the mode for the zone to be operated, the press [ZONE ON].
When the power turns on, the “
”, “
”
or “
” indicator lights on the display.
b Also press [INPUT SOURCE SELECT] when in standby mode, the power turns on.
b When using ZONE2, ZONE3 or ZONE4, it is
possible to turn the power for the MAIN ZONE only on or off by pressing [MAIN ZONE ON] or
[MAIN ZONE OFF].
3Select the input source.
Operation on the main unit
q Press <ZONE2/3/4 / REC SELECT> and
select the zone to be adjusted.
w Turn <SOURCE SELECT> to choose the input source.
Operation on the remote control unit
In the zone mode you want to operate, press [INPUT SOURCE SELECT].
b The same input source as in the main zone can be selected easily by pressing the [M.ZONE CALL] on the sub remote control unit.
4Adjust the item below.
nAdjust the Volume
Operation on the main unit
q Press <ZONE2/3/4 / REC SELECT>
and select the zone to be adjusted. w Turn <MASTER VOLUME> to
adjust.
Operation on the remote control unit
In the zone mode whose volume you want to adjust, press [VOLUME].
GAdjustable rangeH
– – –
(When | the “Volume Display” setting is | ||
“Relative”) | |||
| |||
GAdjustable rangeH | 0 ~ 41 ~ 99 |
| |
(When | the “Volume Display” setting is | ||
“Absolute”)
b Upon purchase, “Volume Limit” is set to “- 10dB (71)”.
nTurning off the Sound Temporarily (MUTE)
In the zone mode for which you want
to mute the sound, press [MUTE].
The sound is reduced to the level set at menu “Mute Level” (vpage 53).
b To cancel, either adjust the volume or press [MUTE] again.
bThe setting is canceled when the zone’s power is turned off.
b The volume can be adjusted in ZONE2 and ZONE3.
106
[M. ZONE CALL]
Sub remote control unit