Making Detailed Settings (Manual Setup)
OPTION | Making Other Settings (Option Setup) | |
Default settings are underlined. | ||
|
Setting items | Setting contents |
Volume Control | Volume Display : Set how volume is displayed. |
Set the MAIN ZONE volume | • Relative : Display |
setting. | • Absolute : Display in the range 0 (Min) ~ 99. |
| • The “Volume Display” setting is applied also to the “Volume Limit” and |
| “Power On Level” display method. |
| • The “Volume Display” setting applies to all zones. |
| Volume Limit : Make a setting for maximum volume |
| • OFF : Do not set a maximum volume. |
| • |
| Power On Level : Define the volume setting that is active when the |
| power is turned on. |
| • Last : Use the memorized setting from the last session. |
| • – – – (0) : Always use the muting on condition when power is turned on. |
| • |
| Mute Level : Set the amount of attenuation when muting is on. |
| • Full : The sound is muted entirely. |
| • |
| • |
Source Delete | PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX / |
Remove input sources | NET/USB / TUNER / XM / SIRIUS / HD Radio : Select input source that |
that are not used from the | is not used. |
display. | • ON : Use this source. |
| • Delete : Do not use this source. |
| NOTE |
| • Input sources being used in the various zones cannot be deleted. |
| • Input sources set to “Delete” cannot be selected using SOURCE |
| SELECT. |
GUI | Screensaver : Make screensaver settings. |
Make GUI related settings. | • ON : The screen saver is activated during GUI menu display or NET/USB |
| / iPod / TUNER / XM / SIRIUS / HD Radio screen display if no operation |
| is performed approximately for a continuous |
| press uio p, the screen saver is cancelled and the screen before |
| that screen saver started is displayed. |
| • OFF : Screen saver is not activated. |
Setting items | Setting contents |
|
|
GUI | Wall Paper : Set wallpaper to display the background when playback is |
(Continued) | stopped, etc. |
| • Picture : Set the background to a picture (DENON logo). |
| • Black : Set the background to black. |
| • Gray : Set the background to gray. |
| • Blue : Set the background to blue. |
| Format : Set the video signal format to be output for the TV you are |
| using. |
| • NTSC : Select NTSC output. |
| • PAL : Select PAL output. |
| The “Format” can also be set by the following procedure. However, |
| the GUI screen is not displayed. |
| 1. Press and hold the main unit’s DSX and RETURN for at least 3 |
| seconds. |
| “Video Format” appears on the display. |
| 2. Press o p and set the video signal format. |
| 3. Press the main unit’s ENTER, MENU or RETURN to complete the |
| setting. |
| NOTE |
When a format other than the video format of the connected TV is set, the picture will not be displayed properly.
Text : Display the content of operation during switching of surround mode, input mode, etc.
•ON : Turn display on.
•OFF : Turn display off.
Master Volume : Master volume display during adjustment.
•Bottom : Display at the bottom.
•Top : Display at the top.
•OFF : Turn display off.
When the master volume display is hard to see when superimposed on movie subtitles, set to “Top”.
NET/USB : Set the NET/USB screen display time when the input source is “NET/USB”.
•Always : Show display continuously.
•30s : Show display for 30 seconds after operation.
•10s : Show display for 10 seconds after operation.
•OFF : Turn display off.
See overleaf
Specifications Troubleshooting Information Control Remote
Main remote control unit | :Displaying the menu | :Moves the cursor | :Confirm the setting | :Return to previous menu | 53 |
operation buttons | Cancel the menu | (Up/Down/Left/Right) |
|
|
|