
GWireless LANH
Symptom | Cause / Countermeasure | Page |
Cannot connect to | • The settings of the SSID and network key (WEP) are incorrect. | 46 ~ 48 |
network. | Match the network settings with the |
|
| • The reception is poor and the signals cannot be received. Shorten | – |
| the distance from the wireless LAN’s access point, remove any |
|
| obstacles and otherwise improve visibility, then try reconnecting. |
|
| Also install away from microwave ovens and the access points of |
|
| other networks. |
|
| • There are multiple networks and the usable channels overlap. Set | – |
| the access point’s channel settings away from the channels used |
|
| for other networks. Alternatively, connect using a network cable. |
|
Played sound is | • There are multiple networks and the usable channels overlap. Set | – |
interrupted or sound | the access point’s channel settings away from the channels used |
|
cannot be played. | for other networks. Alternatively, connect using a network cable. |
|
GXM Satellite RadioH |
|
|
|
|
|
Symptom | Cause / Countermeasure | Page |
“CHECK XM | • The XM | 21 |
TUNER” is |
| |
displayed. | the |
|
| dock and check the XM |
|
|
| |
”CHECK ANTENNA” | • The XM antenna is not connected to the XM | 21 |
is displayed. | the XM antenna cable is damaged. Check that the XM antenna |
|
| is securely connected to the XM |
|
| antenna cable for damage. Replace the XM antenna if the cable is |
|
| damaged. |
|
”NO SIGNAL” is | • The signal cannot be received. Reposition your XM | – |
displayed. | and Home Dock antenna. |
|
”OFF AIR” is | • The selected channel is not currently broadcasting. Select another | – |
displayed. | channel. |
|
Receiving only XM | • The XM | – |
channels 0 and 1. |
|
|
“XM - - - ” is | • The selected channel is not available. The channel may have been | – |
displayed. | reassigned to a different channel number. This message may |
|
| occur initially with a new radio or a radio that has not received |
|
| XM’s signal for an extended period. Consult the latest channel |
|
| guide at www.xmradio.com or www.xmradio.ca for the current |
|
| list of channels. For cases of a new radio or a radio that has not |
|
| received XM’s signal for an extended period, allow the radio to |
|
| receive the XM satellite signal for at least 5 minutes and then try |
|
| to select the channel again. |
|
“CH UNAVAILABLE” | • Channel is not present. Select another channel. | – |
is displayed. |
|
|
Symptom | Cause / Countermeasure | Page |
“CH | • You selected an XM channel that is blocked or cannot be received | – |
UNAUTHORIZED” is | with your XM subscription package. Consult the latest channel |
|
displayed. | guide at www.xmradio.com or www.xmradio.ca for the current |
|
| list of channels. For information on receiving this channel, visit |
|
| www.xmradio.com or www.xmradio.ca contact XM Satellite |
|
| Radio at |
|
“UPGRADE XM | • The connected XM | – |
TUNER” is displayed. | 4810CI. Please use an XM |
|
GSIRIUS Satellite RadioH |
| |
|
|
|
Symptom | Cause / Countermeasure | Page |
“CHECK SIRIUS | • The SiriusConnect Home Tuner unit is not connected. Check that | 22 |
TUNER” is displayed. | the connections are correct. |
|
”ANTENNA ERROR” | • The antenna is not connected. Check that the connections are | 22 |
is displayed. | correct. |
|
”NO SIGNAL” is | • The signal cannot be received. Reposition the antenna. | – |
displayed. |
|
|
”INVALID CHANNEL” | • Channel is not present. Select another channel. | – |
is displayed. |
|
|
”ACQUIRING | • The signal cannot be received. Reposition your SiriusConnect | – |
SIGNAL” is displayed. | Home Tuner and Home Dock antenna. |
|
| • Displays while SiriusConnect HomeTuner is connected. Reposition | – |
| your SiriusConnect Home Tuner and Home Dock antenna. |
|
”Call SIRIUS”z is | • Channels are not subscribed to. If you subscribe to the channel, | – |
displayed. | you can receive the channel. |
|
”SUBSCRIPTION | • While updating contract information. | – |
UPDATED” is |
|
|
displayed. |
|
|
”Enter Lock Code | • Selected channels are locked. Please insert pass word (4 digits) | – |
[ ]” is displayed. | into “[ ]”. |
|
z: After scroll displays “Call
Specifications Troubleshooting Information Control Remote
133