Specifications Troubleshooting Information Control Remote
Other Operations
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit 
BUTTON
Button only on the main unit 
<BUTTON>
Button only on the remote control unit 
[BUTTON]
<SOURCE SELECT> <ZONE2/3/4 / REC SELECT>
[
MAIN] 
[INPUT 
SOURCE 
SELECT] 
Playing Super Audio CD
1Either assign the input source to be used to “HDMI” (vpage 59), or assign “D.LINK” at the “Digital” setting (vpage 59 “Input Assign”).
2Either turn <SOURCE SELECT> or press [INPUT SOURCE SELECT] to select the input source assigned
in step 1.
The “
” or “ 
” indicator lights on the display.
3Select the surround mode (vpage 87 “Selecting the surround mode).
b We recommend playing in the DIRECT mode.
4 Start playing the Super Audio CD. The “
” indicator lights on the display.
b For operating instructions, refer to the respective equipment’s operating instructions.
•When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted as such into analog signals. When playing in other surround modes, the DSD signals are first converted into PCM format, then into analog signals.
•“DSD DIRECT” is shown on the display when playing DSD
Recording on an External Device (REC OUT mode)
When using the audio/video recording connectors (VCR or DVR outputs), you can record the audio or video from a different program source while listening to the currently played track.
1 Press <ZONE2/3/4 / REC SELECT> .
“ZONE2 SOURCE” is shown on the display.
2Turn <SOURCE SELECT> until “RECOUTSOURCE” is displayed.
The “
” indicator lights.
ZONE2 SOURCE 
ZONE2 TUNER 
····
ZONE2 HD Radio
RECOUT HD Radio 
RECOUT SIRIUS
····
RECOUT SOURCE
3Turn <SOURCE SELECT> to choose the input source to be recorded.
4Play the program source.
b For operating instructions, refer to the respective equipment’s operating instructions.
5Start recording.
b For operating instructions, refer to the respective equipment’s operating instructions.
98