Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

Connecting Devices

SIRIUS Connector

•The AVR-4810CI is a SIRIUS Satellite Radio Ready® receiver. You can receive SIRIUS® Satellite Radio by connecting to the SiriusConnect Home Tuner and subscribing to the SIRIUS service.

•Plug the SIRIUS connector on the SIRIUS service.

•Position the Home Tuner antenna near a south-facing window to receive the best signal.

For details, see “Listening to SIRIUS Satellite Radio” (vpage 73). When making connections, also refer to the operating instructions of the SiriusConnect Home Tuner.

SiriusConnect Home Tuner

b When connecting digital audio

NOTE

Keep the power cord unplugged until the SiriusConnect Home Tuner connection have been completed.

SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All rights reserved. Service not available in Alaska and Hawaii.

nPositioning the Antenna

For a consistent satellite signal, the antenna must be positioned correctly. Use the following map to determine which area you are in and position the antenna accordingly.

 

 

 

 

SKY

 

NORTH

 

 

 

WEST

q

t

r

EAST

 

 

 

 

w

 

e

 

HORIZON

SOUTH

Area 1 : Point the antenna toward the sky in the east, northeast, or southeast, either through a window or outside.

Area 2 : Point the antenna toward the sky in the north or northeast, either through a window or outside.

Area 3 : Point the antenna toward the sky in the north or northwest, either through a window or outside.

Area 4 : Point the antenna toward the sky in the west, northwest, or southwest, either through a window or outside.

Area 5 : Put the antenna outside and point it straight up. The antenna cannot be used indoors.

FM/AM

An F-type FM antenna cable plug can be connected directly.

Direction of broadcasting station

FM antenna

AM loop antenna (small, supplied)

75 Ω/ohms Coaxial cable

FM indoor

antenna

(supplied)

AM outdoor

Ground antenna

Set as Necessary

When connecting digital of the SiriusConnect Home Tuner, perform the setting “Digital”.

“Input Assign” (vpage 59)

22