Denon AVR-4810CI manual 134

GAudioH

Symptom			Cause / Countermeasure	Page
No sound is produced			• When playing monaural audio sources, select a surround mode	87 ~ 89
from center speaker.			other than “STANDARD” (Dolby/DTS Surround).
No sound is produced			• Set the surround mode to a mode for surround playback.	87 ~ 89
from surround
speakers.
No sound is produced			• Check that the surround back speaker’s power amplifier	40, 41
from surround back			assignment is set to “Normal”.
speaker.			• Set the surround back speakers to something other than	41
			“None”.
			• Set “Surround Parameter” – “Surround Back” to something	91
			other than “OFF”.
			• Set the surround mode to the surround playback mode.	87 ~ 89
No sound is produced			• Turn on the subwoofer’s power.	–
from subwoofer.			• Set the subwoofer to “Yes”.	41
			• Check the subwoofer connections.	14
			• Increase the subwoofer’s channel level.	100
DTS sound is not			• Set the Blu-ray disc/DVD player’s audio output setting to “Bit-	–
output.			stream”. For details, refer to the Blu-ray disc/DVD player’s
			operating instructions.
			• Use a DTS-compatible Blu-ray disc player/DVD player.	–
			• Set the decode mode to “Auto” or “DTS”.	61
Dolby TrueHD, DTS-			• Make HDMI connections.	17
HD, Dolby Digital Plus			• Set the Blu-ray disc/DVD player’s audio output setting to “Bit-	–
audio is not output.			stream”. For details, refer to the Blu-ray disc/DVD player’s
			operating instructions.
			• Use a DTS-compatible Blu-ray disc player.	–
GControl dock for iPodH
Symptom			Cause / Countermeasure	Page
iPod	cannot	be	• Connect to the terminal to which “iPod dock” was assigned and	31, 60
played.			switch the input source.
			• Check the iPod connections.	19
			• Plug the control dock for iPod’s AC adapter into a power outlet.	–
			Communications with the AVR-4810CI are not possible unless
			the AC adapter is plugged in.

GVideoH

Symptom			Cause / Countermeasure	Page
No picture appears.			• Check the connections of the AVR-4810CI’s video output	17, 18
			terminals and the TV’s input terminals.
			• Make the proper input setting for the input terminals of the TV	–
			connected to the AVR-4810CI.
			• Cancel the PURE DIRECT mode.	89
			• High definition (1080i/720p) and progressive (480p/576p) video	–
			signals are not down-converted. Set the player to interlace
			(480i/576i) signals.
			• Check the “Video Select” setting.	60
Picture	cannot	be	• The REC OUT video terminal does not have a video conversion	20
recorded.			function, so use a video cable to input video signals, an S-Video
			cable to input S-Video signals.
DVDs	cannot	be	• This is not a malfunction. Most movie software includes copy	–
copied on a VCR.			prevention signals and cannot be copied.
GUI is not displayed.			• Set “Format” according to the format (NTSC or PAL) of the TV	53
			being used.
GHDMIH
Symptom			Cause / Countermeasure	Page
HDMI audio signals			• Set “HDMI Audio Out” to “AMP” to output HDMI audio signals	43
are not output from			from the speakers.
speakers.
No picture appears			• Check the connection of the HDMI connectors.	17
with HDMI			• Select the input source assigned to the HDMI terminal at	31, 59
connections.			“HDMI”.
			• Connect a monitor that is compatible with copyright protection	17
			(HDCP).
			• Check that the output format (HDMI FORMAT) of the connected	17, 18
			player, etc., matches the TV’s compatible input formats.
			• Depending on the monitor you have connected, the display may	43
			not be correct when you set to “Auto (Dual)”. In such a case, set
			to either “Monitor 1” or “Monitor 2”.
No sound is output			• Set “HDMI Audio Out” to ”TV” to output HDMI audio signals	43
from the monitor			from the TV.
connected with HDMI
connections.
When performing the			• Set “HDMI Control” – “Control” to “OFF”. When you only want	44
following operations			to operate the power on/off each device, set “Power Off Control”
on a connected			to “OFF”.
device, AVR-4810CI
has the same
operations.
• Power ON/OFF
• Switching		audio
output devices
• Adjust volume
• Switch input source

Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

131