Getting
Adjusting the Sound and Picture Quality (Audio/Video Adjust)
Setting items | Setting contents |
Setting items | Setting contents |
Settings Connections Started
Audyssey DSX Settings
(Continued)
About Audyssey Dynamic Surround Expansion (DSX)
Audyssey DSX is a scalable surround expansion system that adds new channels to improve the surround impression. Based on research in human hearing DSX adds a pair of Wide channels in the front because that information is critical in the rendering of a realistic soundstage. DSX then adds a pair of Height channels above the main front channels to reproduce the next most important acoustical and perceptual cues related to soundstage depth. In addition to creating these new channels, DSX applies Surround Envelopment Processing to enhance the blend between the front and side/back surround channels.The result is a much more seamless and enveloping home theater experience.
RESTORER |
| OFF : Do not use RESTORER. | |
This | function | restores | Mode 1 (RESTORER 64) : Optimized mode for compressed sources with |
compressed audio | signals | very weak highs. | |
to how they were before | Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all | ||
compression and corrects the | compressed sources. | ||
sense of volume of the bass | Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with | ||
and treble to obtain richer | normal highs. | ||
playback sound. |
|
| |
|
|
| • This can be set with analog signals or when a PCM signal (fs = 44.1/48 |
|
|
| kHz) is input. |
|
|
| This cannot be set when the input mode is set to “EXT. IN” or when the |
Specifications Troubleshooting Information Control Remote
Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
Adjust CH : Correct the tone of each speaker.
qSelect the speaker tone adjustment method. All : Adjust the tone of all speakers together.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
wSelect the speaker.
eSelect the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz b Select the speakers you want to adjust when “L/R” or “Each” is
selected.
rAdjust the level.
Can be set when “MultEQ XT” setting (vpage 92) is “Manual”.
Curve Copy : Copy “Audyssey Flat” curve from MultEQ® XT.
Yes : Copy.
No : Do not copy.
“Curve Copy” is displayed after Audyssey Auto Setup has been performed.
Default : Reset the settings to the default values.
•Yes : Reset.
•No : Do not Reset.
surround mode is set to “DIRECT”. |
|
|
• The default setting for “iPod” and “NET/USB” are “Mode 3”. All others | ||
are set to “OFF”. |
|
|
• When set to something other than “OFF”, “ |
| ” is displayed. |
| ||
• This can also be set by pressing RESTORER on the main remote control | ||
unit during playback. |
|
|
| OFF |
|
| Mode 1 |
|
| Mode 2 |
|
|
|
| (RESTORER 64) | (RESTORER 96) | ||||
|
|
|
| Mode 3 |
|
|
| |
|
|
|
|
|
|
| ||
|
|
| (RESTORER HQ) |
|
|
| ||
About the RESTORER function
•Such compressed audio formats as MP3, WMA (Windows Media Audio) and
•This is displayed on the GUI menu and can be set when the input source is set to “TUNER”, “XM”, “HD Radio” or “NET/USB”, or when analog signals (including FM/AM signals) or PCM signals (fs = 44.1/48 kHz) are input.
Audio Delay |
| 0ms ~ 200ms | |
While | viewing | video, |
|
manually adjust the time to | • This can be set within the range of 0 to 100 ms when “Auto Lip | ||
delay audio output. | Sync” is set to “ON” and when a TV compatible with Auto Lipsync is |
| |
| connected. |
| • Store “Audio Delay” for each input source. |
94 | Main remote control unit | :Displaying the menu | :Moves the cursor | :Confirm the setting | :Return to previous menu |
| operation buttons | Cancel the menu | (Up/Down/Left/Right) |
|
|