Setting the Time the Backlight Stays Lit
1 Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
2 Press [9], [7] and [3], in that order.
The signal transmission indicator flashes twice and the backlight on time setting mode is set.
3 Set the light on time.
The signal transmission indicator flashes twice.
[Settable times] : [1] : 5 sec.
[2]: 10 sec. (Default)
[3]: 15 sec.
[4]: 20 sec.
[5]: 25 sec.
Adjusting the Backlight’s Brightness
The display’s brightness can be adjusted in 5 steps. (Default: Step 5)
1 Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
2 Press [CHANNEL +] or [CHANNEL
The display gets one step brighter when [CHANNEL +] is
pressed.
The display gets one step darker when [CHANNEL
3Press [RC SETUP] to complete the setting.
Specifying the Zone Used with the Main Remote Control Unit
When the [MAIN] Device Select button is pressed, only the set zone can be operated with the main remote control unit.
1Press [MAIN] to light the “MAIN” zone indicator.
2 Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice.
3 Press [9], [9] and [9], in that order.
The signal transmission indicator flashes twice and the backlight on time setting mode is set.
4 Press [1 ~ 4] to set.
The signal transmission indicator flashes twice.
[Settable items]
[1]: When only using “MAIN” / “MACRO”
[2]: When using “MAIN” / “Z2” / “MACRO”
[3]: When using “MAIN” / “Z2” / “Z3” / “MACRO”
[4]: When using “MAIN” / “Z2” / “Z3” / “Z4” / “MACRO” (Default)
Operating the Main Remote Control Unit
Specifications Troubleshooting Information Control Remote
115