Playing Files Stored on USB Memory Devices

Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on the AVR- 4810CI.

1Playback preparation.

qAt “USB Select” (vpage 62), select the USB port to be used.

w Connect the USB memory device to the USB port set in q.

2Press [SOURCE SELECT] to display the GUI Source Select menu, then select “” (vpage 31).

3Set the main remote control unit to the “NET/USB” mode (vpage 108 “Operating the Main Remote

Control Unit”).

4Press ui to select the search item or folder, then press ENTER or p.

5

Press ui to select the file, then press ENTER or p.

Playback starts once buffering reaches “100%”.

6Adjust the items below.

n Adjusting the master volume (vpage 85) n Selecting the surround mode (vpage 87) n Adjusting the Sound and Picture Quality

(vpage 90)

nTo stop (vpage 85)

nStopping playback temporarily (vpage 85) n Selecting tracks (vpage 85)

n Playing repeatedly (vpage 86)

n Playing in random order (vpage 86) n Searching pages (vpage 86)

n Searching by first letter (vpage 86)

•By default, the front panel’s USB port will be used.

•Depending on the size of the still picture (JPEG) file, some time may be required for the file to be displayed.

•During playback of still picture (JPEG) files, the files can also be switched using [TU d] (previous file) and [TU f] (next file).

•If the USB memory device is divided into multiple partitions, only the top partition can be selected.

•The AVR-4810CI is compatible with MP3 files conforming to “MPEG- 1 Audio Layer-3” standards.

•When [USB] on the sub remote control unit is pressed, playback starts from the first file stored on the USB memory device.

NOTE

•The AVR-4810CI is equipped with two USB ports, one each on the front and rear panels. It is not possible to use the set with USB memory devices connected to both the ports at the same time. Select the USB port you want to use at “USB Select” (vpage 62).

•DENON will accept no responsibility whatsoever for any loss or damage to data on USB memory devices when using the USB memory device connected to the AVR-4810CI.

•USB memory devices will not work via a USB hub.

•DENON does not guarantee that all USB memory devices will operate or receive power. When using a portable USB connection type HDD of the kind to which an AC adapter can be connected to supply power, use the AC adapter.

•It is not possible to connect and use a computer via the AVR-4810CI’s USB port using a USB cable.

•The AVR-4810CI is not compatible with the iPod shuffle.

Playing Network Audio, USB Memory Devices

Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

81