Denon AVR-4810CI 64

Setting items	Setting contents

i/p Scaler	Analog : Use i/p scaler function for analog video signal.
The input source’s resolution	Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
is converted to the resolution	OFF : Do not use i/p scaler function.
set at “Resolution”.
	• This can be set when “Video Convert” is set to “ON”.
	• “Analog & HDMI” can be set for input sources for which an HDMI input
	terminal is assigned.
	• This function is not effective when the input signal is x.v.Color or
	computer resolution.
Resolution	Auto : The number of pixels the TV connected to the HDMI output terminal
Set resolution of the video	supports is detected automatically and the appropriate output resolution
signal output to HDMI.	is set.
	480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution.

•This can be set when “i/p Scaler” is set to anything other than “OFF”.

•When “i/p Scaler” is set to ”Analog & HDMI”, the resolution of both the analog video input signal and HDMI input signal can be set.

•To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video signals.

•When set to “1080p/24Hz”, you can enjoy film-like pictures for film sources (in 24 Hz). For video sources and mixed sources, we recommend setting the resolution to “1080p”.

•It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a resolution of 1080p/50Hz.

Progressive Mode

This can be set when the input source is

DVD

HDP

SAT/CBL

Select optimum progressive

VCR

DVR

V.AUX

mode for video material.

Auto : The video material is automatically detected and the appropriate

mode is set.

Video 1 : Select mode suitable for video playback

Video 2 : Select mode suitable for video and 30-frame film material

playback.

This can be set when “i/p Scaler” is set to anything other than

“OFF”.

Aspect

This can be set when the input source is

DVD

HDP

SAT/CBL

Set the aspect ratio for the

VCR

DVR

V.AUX

NET/USB

video signals output to the

Full : Output at 16:9 aspect ratio.

HDMI.

Normal : Output at 4:3 aspect ratio.

This can be set when “i/p Scaler” is set to anything other than “OFF”.

Making the Input Settings (Source Select)

Changing the Input Mode and Decoding Mode (Input Mode)

Default settings are underlined.

The selectable input modes depend on the input source and “Input Assign” (vpage 58) setting.

Setting items	Setting contents

Input Mode	Auto : Automatically detect input signal and perform playback.
Set the audio input modes for	HDMI : Play only signals from HDMI input.
the different input sources.	Digital : Play only signals from digital input.
	Analog : Play only signals from analog input.
	EXT. IN : Play only signals from EXT. IN input.

•“HDMI” can be set for input sources for which “HDMI” is assigned at “Input Assign” (vpage 59).

•“Digital” can be set for input sources for which “Digital” is assigned at “Input Assign” (vpage 59).

•When digital signals are properly input, the ”” indicator lights on

the display. If the ”” indicator does not light, check the digital input connector assignment and the connections.

•The surround mode cannot be set if the input mode is set to “EXT. IN”.

Decode Mode

This can be set when the input source is

DVD

HDP

Set the decode mode for

SAT/CBL

VCR

DVR

V.AUX

input source

Auto : Detect type of digital input signal and decode and play

automatically.

PCM : Decode and play only PCM input signals.

DTS : Decode and play only DTS input signals.

• This can be set for input sources for which “HDMI” or “Digital” is

assigned at “Input Assign” (vpage 59).

• Normally set this to “Auto”. Set “PCM” and “DTS” when inputting the

corresponding input signal.

Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

Main remote control unit	:Displaying the menu	:Moves the cursor	:Confirm the setting	:Return to previous menu	61
operation buttons	Cancel the menu	(Up/Down/Left/Right)