Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

Making Detailed Settings (Manual Setup)

 

Setting items

 

Setting contents

 

 

 

 

 

HDMI Control

 

 

 

Control

External

devices

can

be

• ON : Use HDMI control function

controlled from the AVR-

• OFF : Do not use HDMI control function

4810CI and the AVR-4810CI

When a device that is not compatible with the HDMI control function

can

be

 

controlled

from

 

is connected, set “Control” to “OFF”.

external devices.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

• Please

 

consult

 

the

• When “Control” is set to “ON”, it consumes more standby power.

operating

instructions

for

• When not using this unit for a long period, we recommend that you

each connected device to

press POWER on the main unit to turn off the power.

• “HDMI Control” does not work when the power to the equipment is off.

check the settings.

 

 

Either power on or set to standby.

• Refer

to

“HDMI

Control

Standby Source : Set the HDMI connector for HDMI signal input during

Function” (vpage 99) for

more information about the

standby.

HDMI control function.

 

• Last : Standby with last used input source during power on.

 

• HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : The standby mode

• When

 

the

“Control”

setting has been changed,

is set at the input source assigned to the respective.

 

always turn off the power

This can be set when “Control“ is set to “ON“.

to the connecting devices

 

Control Monitor : Set the HDMI MONITOR terminal to output the HDMI

afterwards and

then turn

control signal.

back on.

 

 

 

 

• Monitor 1 : Output from the MONITOR 1 terminal.

 

 

 

 

 

 

 

NOTE

 

 

 

 

• Monitor 2 : Output from the MONITOR 2 terminal.

The

HDMI

control function

This can be set when “Control“ is set to “ON“.

controls

operations

of

a

 

Power Off Control : The power of the AVR-4810CI and external device

TV that is compatible with

turn off together.

the

HDMI

control

function.

• ON : Interlock.

Make sure that the TV and

• OFF : Do not interlock.

HDMI are connected when

 

you perform HDMI control.

This can be set when “Control“ is set to “ON“.

 

 

 

 

 

 

 

 

Making the Audio Settings (Audio Setup)

Default settings are underlined.

Make settings for audio playback.

Setting items

Setting contents

EXT. IN Setup

 

Subwoofer Level : Set playback level of subwoofer signal input from the

Setup playback

method for

external input connector (EXT. IN).

analog signals inputted from

• +15dB : This is the recommended level.

external input

connectors

• +10dB / +5dB / 0dB : Select the level according to the player being

(EXT. IN).

 

used.

2ch Direct/Stereo

Setting : Select the method for setting the speakers used in the 2-channel

Make speaker settings for 2-

direct and stereo playback modes.

channel mode playback.

• Basic : The settings at “Speaker Setup” (vpage 41) are applied.

 

 

• Custom : Make separate settings for 2-channel.

Front : Set the front speaker size.

• Large : Use of a large speaker that can adequately playback low frequencies.

• Small : Use of a small speaker that has inadequate playback capacity for low frequencies.

If “Speaker Configuration” – “Subwoofer” (vpage 41) is set to “No”, the setting is automatically set to “Large”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

If “Speaker Configuration” – “Subwoofer” (vpage 41) is set to “No”, the setting is automatically set to “No”. If the “Front” setting is “Small”, the setting is automatically “Yes”.

SW Mode : Select low range signal to be reproduced by subwoofer.

•LFE : When the “2ch Direct/Stereo” – “Front” setting is set to “Large”, the LFE signal alone is output from the subwoofer. Also, when the “2ch Direct/Stereo” – “Front” setting is set to “Small”, the front channel low range signal is added to the LFE signal output from the subwoofer.

•LFE+Main : The front channel low range signal is added to the LFE signal output from the subwoofer.

This can be set when “2ch Direct/Stereo” – “Subwoofer” is set to “Yes”.

44

Main remote control unit

:Displaying the menu

:Moves the cursor

:Confirm the setting

:Return to previous menu

 

operation buttons

Cancel the menu

(Up/Down/Left/Right)