Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

Playing Network Audio, USB Memory Devices

Symbols used to indicate buttons in this manual

Button located on both the main unit

and the remote control unit BUTTON

Button only on the main unit <BUTTON>

Button only on the remote control unit [BUTTON]

ENTER

uiop <STATUS>

[NET/USB]

[A ~ G]

[MEMO]

uiop

ENTER

[SOURCE

SELECT]

(MAIN mode)

[1 ~ 8]

Listening to Internet Radio

1 Playback preparation.

q Check the network environment, then turn on the AVR- 4810CI’s power (vpage 26 “Connecting to a Home Network (LAN)”).

w If settings are required, make the “Network Connecting” (vpage 46).

2Press [SOURCE SELECT] to display the GUI Source Select menu, then select “” (vpage 31).

3Set the main remote control unit to the “NET/USB” mode (vpage 108 “Operating the Main Remote

Control Unit”).

4Press ui to select the item you want to play, then press ENTER or p.

The station list is displayed.

5Press ui to select the station, then press ENTER or p.

Playback starts once buffering reaches “100%”.

6Adjust the items below.

n Adjusting the master volume (vpage 85)

nSelecting the surround mode (vpage 87) n Adjusting the Sound and Picture Quality

(vpage 90)

nTo stop (vpage 85)

nSearching pages (vpage 86)

nSearching by first letter (vpage 86)

•There are many Internet radio stations on the Internet, and the quality of the programs they broadcast as well as the bit rate of the tracks varies widely.

Generally, the higher the bit rate, the higher the sound quality, but depending on the communication lines and server traffic, the music or audio signals being streamed may be interrupted. Inversely, lower bit rates mean a lower sound quality but less tendency for the sound to be interrupted.

•“Server Full” or “Connection Down” is displayed if the station is busy or not broadcasting.

•On the AVR-4810CI, folder and file names can be displayed as titles. Any characters that cannot be displayed are replaced with “. (period)”.

•Use the RESTORER mode to expand the low and high frequency components of compressed audio files and achieve a richer sound “RESTORER” (vpage 94). The default setting is “Mode 3”.

•When <STATUS> is pressed, the display can be switched between the title name and radio station name.

•The time (default : 30 sec) for which the GUI menu are displayed can be set at GUI menu “GUI” – “NET/USB” (vpage 53). Press uio p to return to the original screen.

Recently Played Internet Radio Stations

Recently played internet radio stations can be selected from “Recently Played”.

Up to 20 stations stored in “Recently Played”.

1Press ui to select “Recently Played”, then press

ENTER or p.

2Press ui to select the item you want to play, then press ENTER or p.

78