Setting items

 

Setting contents

 

 

 

 

 

 

Amp Assign

 

 

 

 

Configuration : Select MAIN ZONE channel configuration.

Change

the

power

• 5.1ch / 7.1ch / 9.1ch / 11.1ch

amp

assignment

to

suit

Extra Channel : Select the channels to be used from among surround

the

speaker

system

back speakers (SB), front height speakers (FH), front wide speakers (FW).

configuration.

 

 

 

n When setting “Configuration” to “7.1ch”

 

 

 

 

 

 

 

 

 

 

 

 

• SB / FH / FW

 

 

 

 

 

 

n When setting “Configuration” to “9.1ch”

 

 

 

 

 

 

• SB/FH / SB/FW / FH/FW

 

 

 

 

 

 

Assign : Select power amp usage method.

 

 

 

 

 

 

• NORMAL : This is the usual configuration.

 

 

 

 

 

 

• +Z2 : Assign a power amp to ZONE2 audio.

 

 

 

 

 

 

• +Z2+Z3 : Assign a power amp to ZONE2 and ZONE3 audio.

 

 

 

 

 

 

• ALL Z2 : Assign all power amps to ZONE2 audio.

 

 

 

 

 

 

• ALL Z2+Z3 : Assign all power amps to ZONE2 and ZONE3 audio.

 

 

 

 

 

 

• FREE : Freely assign power amps to the desired channels.

 

 

 

 

 

 

Front : Select front speaker connection method.

 

 

 

 

 

 

• NORMAL : This is the usual configuration.

 

 

 

 

 

 

• Bi-WIRING :Bi-wire the front speakers.

 

 

 

 

 

 

• Bi-AMP :Bi-amp the front speakers.

 

 

 

 

 

 

• 2CH BW : Bi-wire another front speaker for 2 channel play mode.

 

 

 

 

 

 

• 2CH BA : Bi-amp another front speaker for 2 channel play mode.

Speaker Configuration

 

Front : Set the front speaker size.

Select speaker configuration

• Large : Use of a large speaker that can adequately playback low

and size (bass reproduction

frequencies.

capability).

 

 

 

 

• Small : Use of a small speaker that has inadequate playback capacity for

NOTE

 

 

 

 

low frequencies.

 

 

 

 

 

Select “Large”

or

“Small”

• When “Subwoofer” is set to “No”, “Front” can automatically set to

not

according

to

the

physical size of the speaker

“Large”.

• When “Front” is set to “Small”, “Center”, “Surround“, “Surround

but

according

to

the

low

frequency

 

reproduction

Back”, “Front Height” and “Front Wide“ can not be set to “Large”.

capabilities

based

on

the

Center : Set the presence and size of the center speaker.

frequency set at “Crossover

• Large : Use of a large speaker that can adequately playback low

Frequency” (vpage 43).

frequencies.

• Small : Use of a small speaker that has inadequate playback capacity for low frequencies.

• None : Select when a center speaker is not connected. “Large” is not displayed when “Front” is set to “Small”.

 

Making Detailed Settings (Manual Setup)

 

 

Setting items

Setting contents

 

 

Speaker Configuration

Subwoofer : Set the presence of a subwoofer.

(Continued)

• Yes : Use a subwoofer.

 

• No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “Subwoofer” can automatically set to “Yes”.

Surround : Set the presence and size of the surround speakers.

•Large : Use of a large speaker that can adequately playback low frequencies.

•Small : Use of a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when the surround speakers are not connected.

•When “Surround” is set to “Large”, “Surround Back”, “Front Height” and “Front Wide“ can be set to “Large”.

•When “Surround” is set to “None”, “Surround Back”, “Front Height” and “Front Wide” can automatically set to “None”.

Surround Back : Set the presence, size and number of surround back speakers.

•Large : Use of a large speaker that can adequately playback low frequencies.

•Small : Use of a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when the surround back speakers are not connected.

•2spkrs : Use two surround back speakers.

•1spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel.

•When “Configuration” is set to “5.1ch” in the “Amp Assign” settings or when “SB” is not selected using “Extra Channel”, no settings can be made for “Surround Back”.

•Even when the Surround Back Speaker setting is other than “None”, sound may not be emitted from the surround back speaker, depending on the playback source. In this case, “Surround Parameters” – “Surround Back” setting other than “OFF” (vpage 91).

See overleaf

Specifications Troubleshooting Information Control Remote zone-Multi Playback Settings Connections Started Getting

Main remote control unit

:Displaying the menu

:Moves the cursor

:Confirm the setting

:Return to previous menu

41

operation buttons

Cancel the menu

(Up/Down/Left/Right)