Emerson E2 operation manual Sensor Type Description, Pulse on

Figure 9-6- Analog Input Screen

Point Name The Point Name is simply a name for the point that may be used as a reference.

Assigning a descriptive name to a point makes setting up inputs for applications much easier. For example, if you have an inside temperature sensor located in Zone 1 of your building, you may name it “ZONE 1 TEMP”. Then, when programming your HVAC applications, you may easily define Zone 1’s temper- ature sensor input by tying it to ZONE 1 TEMP. This keeps you from having to keep track of which sen- sors are tied to which point numbers.

You are required to enter a point name in the Point Name field. The default name is “:{BOARD NAME}:{BOARD NUMBER}:{POINT NUM- BER}.”

Board/Point # The Board/Point number will auto- matically be defined if you are configuring the point from the Input Status screen.

Sensor Type The analog input may come from a number of different sensor types.

Sensor Type	Description
Temperature	CPC Standard Temp Sensor
12V-100 LB	12VDC 100 PSI transducer
	(1-6VDC output) (Discontin-
	ued)
12V-200 LB	12VDC 200 PSI transducer
	(1-6VDC output) (Discontin-
	ued)
Table 9-2- Sensor Input Types

Sensor Type	Description
12V-500 LB	12VDC 500 PSI transducer
	(1-6VDC output) (Discontin-
	ued)
5V-100 LB	5VDC 100 PSI transducer
	(0.5-4.5VDC output)
5V-200 LB	5VDC 200 PSI transducer
	(0.5-4.5VDC output)
5V-500 LB	5VDC 500 PSI transducer
	(0.5-4.5VDC output)
Refrig. Leak	Refrigerant Leak Detector
	(not IRLDS)
Refrig. Level	Refrigerant Liquid Level
	Probe
Liquid Level	Liquid Level Float Sensor
Light Level	Light Level Sensor
Linear	General purpose linear out-
	put sensor
Humidity	Relative Humidity sensor
Pulse Accum.	Kilowatt value from KW
	transducer pulse accumula-
	tion readings (see Units Per
	Pulse on page 9-9)
KW Transducer	Kilowatt transducer using 4-
	20ma/0-5V signal
Dewpoint	Dewpoint probe
LM235 Temp	Linear voltage output tem-
	perature sensor
PT2 Temp	Danfoss PT2 temperature
	sensor
CDK Temp	CDK 2097MC temperature
	sensor
20K Pot Adjust	Standard temperature sensor
	with offset adjustment
	(potentiometer)
ATP Hi Temperature	CPC’s 100K High Tempera-
	ture Sensor (Range 0 - 500
	DegF)
86K Temp	Copeland’s integral dis-
	charge temperature sensor
Table 9-2- Sensor Input Types

Select Eng. Units The engineering units of the

9-8 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011