Emerson operation manual 14 E2 RX/BX/CX I&O Manual Rev 13 14-SEP-2011

Alarm Name	Default	Definition
	Priority
User Cleared All Applications	50	A user has cleared out all data from all applications in
		this E2.
User/Appl. Forced Reset	50	A user or an application has forced a reset of this E2.
VS Alarm	20	Multiflex PAK variable speed device alarm.
VS Inverter Fail	User	A variable-speed inverter driving a variable-speed
		fan or compressor has failed.
WCC Controller Alarm	20	Woodley case controller alarm.
WPK Controller Alarm	20	Woodley Pack Amps Fail alarm.
Watchdog Countdown Hit Zero	20	E2 locked up while trying to perform a task. If this
		alarm occurs often, there may be a problem with your
		system. Contact Retail Solutions service.
Watchdog Reset Timer Failed	20	E2 tried to reset itself to clear a hung task, but the
		“watchdog” feature on the E2 was disabled. Check
		the jumper J19 labeled “Watch Dog” on the E2 main
		board. This jumper should be either be set to
		“ENABLE” or it should not be present at all.
X300<->X300 Links Lost-CRC Err	20	An internal error has caused a loss of communication
		between E2s.

C-14 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011