Emerson E2 operation manual CS-100.See Case Controllers, CS-100

EEVs 11-11	evaporative 11-4
sensor default locations 9-14	fail-safe dip switch setup 11-5
sensor failures 11-15–11-16	fan control 11-4
sensors	single-speed 11-4
default installation locations 9-14	two-speed 11-4
setting up individual CC-100s11-16	variable-speed 11-4
specifying the number of 10-2,10-16	fast recovery 11-4
stand-alone mode 11-15	hardware overview 11-4
superheat control 11-11	input types 11-5
temperature control 11-11	output wiring 11-5
temperature probes	overriding compressor stages 12-10
installing 9-14	problems with F-5
valve cable 9-15	split mode 11-4
valves 11-11	Temperature Differential Strategy 11-3
EEPRs 11-12	Control Keys 12-8
EEVs 11-11	Convenience Store Controller 1-3
liquid pulse 11-11	Cool cut in/cut out setpoints 11-52
liquid stepper 11-11	Copeland Digital Discus Compressor 11-1,11-2
pulse 11-11	CPU 2-2
stepper 11-11	Creating 10-14
suction stepper 11-12	CS-100 11-10
walk-in freezer control 11-15	CS-100.See Case Controllers, CS-100
wash mode. See Clean Mode. 11-14	CT Drives 6-6
CC-100H.See Case Controllers.	CUB 2-7,11-30
CC-100LS.See Case Controllers.	CX Home Screen 12-2
CC-100P.See Case Controllers.	-D-
Checking Boards Online 10-16,12-11	Daisy Chains
Checking Status Screens 12-11	diagram of 6-2
Clean Mode 11-14,12-9	Date and Time 12-12
initiating 12-9	Date Setup 10-9
Clean Out 10-1	Daylight Savings Dates 10-10
Clean Switches 11-7	Defrost
Cold Reset	defrost cycle 11-6,11-12
performing a 10-1	demand 11-13
Cold Reset Button 10-1	fail-safe time 11-13
COM Port Setup 5-1	drip time. See Defrost, run-off time.
Commissioning 10-17	electric 11-13
Commissioning CC-100s 10-17	emergency 11-13
how commissioning works 10-17	initiating 12-9
Commissioning MODBUS 10-17	hot gas 11-12
Compressors	in case controlled circuits 11-12
troubleshooting F-3	inhibiting, using demand sensors 11-13
Condensers	manual defrost
air cooled 11-3	ending a cycle 12-10
strategy 11-3	initiating 12-9
bypassing fan stages 12-10	off-cycle 11-12

•I-3