Emerson E2 operation manual System Information Menu, Actions Menu

Menu Option	Description
5 - Alarm Setup	Set up dial-outs and alarm
	reporting for the current E2.
6 - Logging Setup	Enter information about Logging
	Group applications such as the
	sampling frequency and total
	number of samples.
7 - Network Setup	Accesses the Network Setup
	menu where you can view and/or
	change the configuration of the
	Echelon and RS485 I/O Net-
	works, set up boards, controllers,
	routers, and make controller
	associations.
8 - Global Data	Configure one or more analog or
	digital sensors to be used as
	“global” values by all E2s.
9 - Licensing	Select this option to access the
	License Report screen that lists
	all the applications in E2 that are
	currently licensed and the num-
	ber of each type of applications
	that are in use. You can also add
	additional licenses by pressing
	F1.

Table 12-2- System Configuration Menu Options

The System Information Menu

Figure 12-6- System Information Menu

The System Information menu is used to set up the E2. The options in this menu allow setting up time and date, passwords, toggle full options, general information about the controller, and other important data.

The System Information Menu is another menu used to set up the E2. The options in this menu allow setting up time and date, passwords, toggle full options, general information about the controller, and other important data.

To open the System Information Menu:

1.Press 

2.Press (System Configuration)

3.Press (System Information)

The System Information menu contains nine menu items:

	Menu Option	Description
1	- General Controller Info	Edit general information about
		the E2, such as engineering
		units, and summer/winter
		change-over specifications.
2	- Time and Date	Change the current date and
		time, and specify date formats.
3	- Passwords/User Access	Set up usernames and pass-
		words, and define security level
		requirements.
4	- Firmware Revision	Read-only information screen
		that contains current system ver-
		sion information
5	- Service Actions	Set up system diagnostics (mem-
		ory and execution info), and per-
		form advanced functions
		(system resets and firmware
		update).
6	- Note Pad	Writable field for technician to
		make notes about changes made
		or general information.
7	- Display Users	Enter information about Logging
		Group applications such as the
		sampling frequency and total
		number of samples.
8	- Toggle Full Options	When set to on, FULL will
		appear at the top right of the
		screen and gives user full access
		to options and applications.
9	- Application Default	Choose the default values most
Value Setup		appropriate to the refrigeration
		control components in the sys-
		tem.

Table 12-3- System Information Menu Options

Actions Menu

Functions such as graphing, point logging, overriding, expanded information, setup, detailed status, and manual

12-4 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011