Emerson E2 operation manual Alarm Name Default Definition Priority

Alarm Name	Default	Definition
	Priority
IRLDS: Absorption Data Error	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: ADC Error	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: Data Error	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: Detector Data Error	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: Drift Fault	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: General Fault	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: Line/Filter Flow Fault	20	A zone on an IRLDS unit has a dirty filter or a
		crimped tube.
IRLDS: Pressure Data Error	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: Self-Test Failure	20	An IRLDS has failed its self-test procedure.
IRLDS: Temperature Data Error	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
IRLDS: Unknown Error	20	The IRLDS has experienced an error not recognized
		by the E2.
IRLDS: Voltage Data Error	20	An internal error has occurred in the IRLDS. Check
		the IRLDS display for error code information, and
		call Retail Solutions service.
ISD Missing Phase Lockout	20	After 10 consecutive missing phase trips, the com-
		pressor is locked out on missing phase lockout.
ISD Missing Phase Trip	99	If any of the 3 phases of power is missing after the
		compressor is called to be on, this advisory is gener-
		ated.
ISD Oil Pressure Lockout	20	If we have been in Low Oil warning for 2 minutes we
		will lock out the compressor.
ISD Welded Contactor	20	If there is voltage on the 3 phase sense inputs 0.5 sec-
		onds after the compressor is called to be off, this
		advisory is generated.
ISD Compressor Module Failure	20	A hardware failure has occurred in the ISD module.

C-8 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011