Emerson E2 operation manual Set Up User Access, Level

10.12 Set Up User Access

Access the User Access Setup screen from the System Information menu:

1.Press  to open the Main Menu

2.Press  (System Configuration)

3.Press (System Information)

Figure 10-20- System Information Menu

In the User Access Setup screen, you may add user names and passwords to the controller with varying levels of security, and customize user access for each security level.

To access this menu, choose option  (Passwords/ User Access) from the System Information Menu.

Figure 10-21- User Access Setup Screen

An E2 may be programmed with up to 25 different

users. A user basically consists of a username, a password, and an access level. Whenever a username and password are entered during login, the E2 searches the user records for the username and password. If found, the E2 will log the user in at the access level chosen for the user in the user records.

The access level determines how many of the E2’s fea- tures the user may use. The E2 uses four access levels, one being the lowest, and four being the highest. Table 10-7gives a description of each level and the capabilities they have access to.

Level 1	Read-only access. Users may generally
	only view status screens, setpoints, and
	some system settings.
Level 2	Setpoint and bypass access. Users may
	perform all the tasks a level 1 user may,
	plus they may change control setpoints
	and bypass some devices.
Level 3	Configuration and override access. Users
	may perform all the tasks a level 2 user
	may, plus they may override system set-
	tings, create new cells, and program new
	applications.
Level 4	System Administrator access. All E2 func-
	tions are accessible by a level 4 user.

Table 10-7- User Access Levels

Set Up User Access Quick Start • 10-13