Emerson E2 operation manual Setting Up Logging, Logging Setup Menu

user). If there is no “L” beside the definition, the value is not part of a logging group and therefore will not be logged.

11.5.4 Setting Up Logging

To begin logging setup, go to the Logging Setup menu:

1.Press  for the Main Menu.

2.Press System Configuration.

3.Press Logging Setup.

Figure 11-8- Logging Setup Menu

From this menu, you can control different logging aspects:

•Access Log Group summary screen (or Base Log if no additional log groups exist) to set logging parameters

•Add a new log group and automatically enter edit mode

•Delete a log group

•Displays a report of all logged points for the entire system

For Base Log setup, select 1. Log Groups from this menu:

Figure 11-9- Summary Screen for Logging Groups

The summary screen for Logging Groups will open where a variety of log parameters can be viewed. Log group name, configured resolution setting, number of days to keep logs, the amount of available logging resources, number of analog and digital points associated with this logging group, status, and more can all be seen from this summary screen.

Highlight the desired logging group and press  to open the setup screen for that log group:

Figure 11-10- Logging Setup

From this screen, logging group configuration can be specified. Group name, interval between log records, mode, start date and time, duration of logs, log resolution, points, percentage used, status, and enable/disable logging can be configured. (See the online help for each property

11-18 • E2 RX/BX/CX I&O Manual 026-1610 Rev 13 14-SEP-2011