MODEL 54eA | TABLE OF CONTENTS |
| MODEL 54eA ANALYZER/CONTROLLER |
|
| TABLE OF CONTENTS |
|
Section Title | Page | |
1.0 | SPECIFICATIONS | 1 |
1.1 | Features and Applications | 1 |
1.2 | Specifications | 2 |
1.3 | Ordering Information | 4 |
2.0 | INSTALLATION | 5 |
2.1 | Unpacking and Inspection | 5 |
2.2 | Installation | 5 |
3.0 | WIRING | 8 |
3.1 | General | 8 |
3.2 | Power, Alarm, and Output Wiring | 8 |
3.3 | Sensor Wiring | 10 |
4.0 | DISPLAY AND OPERATION | 16 |
4.1 | General Description | 16 |
4.2 | Display | 16 |
4.3 | Key Functions and Controls | 16 |
4.4 | Alarm Status | 16 |
5.0 | SOFTWARE CONFIGURATION | 17 |
5.1 | Changing Alarm Setpoints | 24 |
5.2 | Ranging the Outputs | 25 |
5.3 | Changing Output Setpoints (PID only) | 26 |
5.4 | Testing Outputs and Alarms | 27 |
5.5 | Choosing Display Options | 28 |
5.6 | Changing Output Parameters | 30 |
5.7 | Changing Alarm Parameters | 33 |
5.8 | Configuring the pH Measurement | 38 |
5.9 | Temperature Compensation and Temperature Units | 41 |
5.10 | Noise Reduction | 42 |
5.11 | Main Sensor Calibration Parameters | 43 |
5.12 | Barometric Pressure | 44 |
5.13 | Security | 45 |
5.14 | Controller Mode Priority | 46 |
6.0 | CALIBRATION - TEMPERATURE | 47 |
6.1 | Introduction | 47 |
6.2 | Temperature Calibration | 48 |
7.0 | CALIBRATION - DISSOLVED OXYGEN | 49 |
7.1 | Introduction | 49 |
7.2 | Zeroing the Sensor | 50 |
7.3 | Calibrating the Sensor in Air | 51 |
7.4 | Calibrating the Sensor Against a Standard Instrument | 53 |
7.5 | Calibrating Barometric Pressure | 54 |
8.0 | CALIBRATION - FREE CHLORINE (499 | 55 |
8.1 | Introduction | 55 |
8.2 | Zeroing the Sensor | 56 |
8.3 | Full Scale Calibration | 57 |
8.4 | Dual Slope Calibration | 58 |
i