MODEL 54eA | SECTION 2.0 |
| INSTALLATION |
SECTION 2.0
INSTALLATION
2.1 UNPACKING AND INSPECTION
Inspect the shipping container. If it is damaged, contact the shipper immediately for instructions. Save the box. If there is no apparent damage, unpack the container. Be sure all items shown on the packing list are present. If items are missing, notify Rosemount Analytical immediately.
2.2 INSTALLATION
2.2.1 General information
1.Although the controller is suitable for outdoor use, do not install it in direct sunlight or in areas of extreme temperatures.
2.Install the controller in an area where vibrations and electromagnetic and radio frequency interference are minimized or absent.
3.Keep the controller and sensor wiring at least one foot from high voltage conductors. Be sure there is easy access to the controller.
4.The controller is suitable for panel, pipe, or wall mounting. Refer to the table below.
| Type of mounting | Section | |
| Wall | 2.2.2 |
|
| Pipe | 2.2.3 |
|
| Panel | 2.2.4 |
|
|
|
|
|
2.2.2 Wall or surface mounting
FIGURE 2-1. Wall Mounting
5
