Workgroup name:

Enter the workgroup name or domain name (up to 15 characters) used for the Windows network environment.

Device name:

Enter the device name (up to 12 characters). LPT1, LPT2, LPT3, and COM cannot be used.

5.After making the settings, click OK. The Password dialog box appears.

6.Enter your password (up to 20 characters) and click OK to save settings. If you are entering a password for the first time,

click Change and set the password. For more information

about passwords, see “About passwords” on page 9-7.

5

 

Follow the on-screen instructions. After updating is complete, refresh the configuration by selecting Refresh from the View menu.

cCaution:

Since it takes 2 or 3 minutes to send new settings to the interface card, you must wait until the on-screen message appears before turning off your printer.

Using the Interface Card with Windows 98/95 5-5