Using Bindery Print Server (NetWare 3.1x/4.1x)
This section contains instructions on using the interface card in Print Server mode under NetWare 3.1x/4.1x/IntranetWare with Bindery emulation.
Configuring the interface card using EpsonNet WinAssist 3
Configure the interface card using EpsonNet WinAssist.
Note:
The Novell Client32 or Novell IntranetWare Client must be installed in your computer. Do not use Novell Client for Windows 95/98 version 3.00 or Novell Client for Windows NT version 4.50.
1.Turn on the printer with the interface card installed.
2.From any NetWare client, log in to the target NetWare server with supervisor privileges. You must log in with bindery connection.
3.Run EpsonNet WinAssist from the Start menu.
4.Click IPX. Select the printer you want to configure from the list, then click Configuration.
Using the Interface Card with NetWare