❏ | TCP/IP |
|
|
|
|
|
|
| |
| Items | Explanations |
|
|
| Get IP Address | Select the method of acquiring the IP |
|
|
|
| address; Manual, RARP, BOOTP, or DHCP. |
|
|
| Set by PING | Select ON when setting the IP address |
|
|
|
| using ping command. |
|
|
|
|
|
|
|
| IP Address | Enter the IP address for the interface card |
|
|
|
| if set to Manual. |
|
|
| Subnet Mask | Set the subnet mask. |
|
|
| Default Gateway | Set the gateway address if needed. |
|
|
| SUBMIT button | Update the changes. |
|
|
|
|
|
|
|
❏ | AppleTalk |
|
|
|
|
|
|
| |
| Items | Explanations |
|
|
| AppleTalk | Enable or Disable AppleTalk. |
|
|
| Printer Name | Enter the name of the printer attached |
|
|
|
| to the interface card (up to 32 |
|
|
|
| characters). |
|
|
| Entity Type | Displays the Entity type of the printer |
|
|
|
| attached to the interface card. If you are |
|
|
|
| using a Level 1 printer, enter the entity |
|
|
|
| type. |
|
|
| Zone Name | Enter the AppleTalk zone. |
|
|
|
| 9 | ||
| Network Number Set | Select Auto or Manual. It should usually |
| |
|
| be set to Auto. |
|
|
|
|
| ||
| Network Number for | Enter the network number when you |
|
|
| Manual Mode | select Manual for Network Number Set. |
|
|
| SUBMIT button | Update the changes. |
|
|
|
|
|
|
|
The EpsonNet Configuration Utility