Unable to make settings using EpsonNet WebAssist.
Unable to set the IP address using the arp/ping commands.
Cause | What to do |
| |
|
|
| 14 |
You haven’t set the IP | Set the IP address for the interface | ||
address for the interface | card using EpsonNet WinAssist, | ||
card. | MacAssist, or the ping command, as |
| |
| |||
| described in Chapter 2. You can check |
| |
| the IP address on a status sheet. |
| |
Cause | What to do |
|
|
The network cable may be | Connect the network cable. Also, check |
disconnected. | the network environment. |
|
|
The address of the router is | Set the IP address of your computer for |
set as the default gateway. | the default gateway temporarily. After |
| setting the IP address, return the IP |
| address to the original value. |
|
|
PING is not on. | Check the Set by PING check box in the |
| TCP/IP menu of EpsonNet WinAssist. |
| Select ON for Set by PING in the TCP/ |
| IP screen of EpsonNet WebAssist. |
Troubleshooting