Installing NetBEUI in Windows NT 4.0

Install NetBEUI in your computer if it has not yet been installed. If it is already installed, go to the next section “Configuring the interface card using EpsonNet WinAssist” on page 6-13.

Note:

Be sure that Workstation is installed in the Services menu.

1.Double-click the Network icon in Control Panel. Click the Protocols tab, and check if the NetBEUI Protocol is in the Network Protocols list.

6

2.If NetBEUI Protocol is not in the list, click Add.

3.Select NetBEUI Protocol and click OK.

Using the Interface Card with Windows 2000/NT 6-11