Brief Overview of Configuring the Interface Card
To configure the interface card you must complete the following steps. See the noted documentation for more detailed information.
1.Install the interface card in your printer. See Chapter 1 or your printer documentation.
2.Install EpsonNet WinAssist or MacAssist. See the supplemental sheet included with the
3.Install the TCP/IP protocol in your operating system when printing with TCP/IP or when using EpsonNet WebAssist for configuration. Then set the IP address for the interface card. See Chapter 2 for instructions on installing TCP/IP and setting the IP address.
4.Install Microsoft Internet Explorer or Netscape Navigator to use EpsonNet WebAssist. See your browser documentation.
5.Configure the interface card using EpsonNet WinAssist, MacAssist, or WebAssist and set up the printer. See the appropriate chapter for your network environment.
6.Use EpsonNet Direct Print to print from TCP/IP. See Chapter 10.
7.Use EPSON Status Monitor 2 to monitor printer status. See Chapter 11.
8.Use EpsonNet Internet Print to print using the Internet Printing Protocol (IPP). See Chapter 12.
9.Use Printer Status Page to monitor printer status through the Internet. See Chapter 13.
8Introduction