Location:
Enter the name of the location where the printer is physically located up to 64 characters.
4.Click the SUBMIT button and enter the password to update the settings. The same password is required for EpsonNet WinAssist, MacAssist, and WebAssist. See “Password” on page
5.If the message “Configuration change is complete!” appears on your screen, the update is complete. Do not exit the Web browser and do not send a job to the printer until this message appears. Then, follow the
Setting up the printer
1.Click Start, point to Settings, and then click Printers.
2.
3.Click the Network printer radio button and click Next.
4.Select the Connect to a printer on the Internet or on your intranet radio button.
5.Enter the URL of the target printer using the format below. The URL should be same as the URL you set in the EpsonNet WebAssist’s IPP configuration page.
http://the IP address of the printer:631/the printer name Example: http://192.168.100.201:631/EPSON_IPP_Printer
6.Follow the