NetWare print servers cannot be monitored beyond routers.
Cause | What to do |
|
|
The number of hops is set to 0.
Change the number of hops according | 14 |
to “Making Status Monitor Settings” |
on page
NDS printers cannot be monitored.
Cause | What to do |
|
|
You are not using a Novell Client.
If you are using Windows NT, use Novell IntranetWare Client. If you are using Windows 95, use Novell IntranetWare Client 32 Ver1.12 or later. If you are using Windows 98, use the latest Novell Client.
An existing printer cannot be found in Windows NT 3.51.
Cause | What to do |
|
|
You may have logged on to | Log on again. To clear this problem |
the network before network | immediately after the operating system |
modules were completely | starts, log on after access to the hard |
loaded. | disk drive is completed. |
Troubleshooting