Epson C82362, C82363, C82364 NetWare printers cannot be monitored

NetWare printers cannot be monitored when Allow monitoring is selected for monitoring Windows shared printers under Windows NT 4.0/3.51.

Cause What to do

EPSON Status Monitor 2 is set incorrectly.

Double-click Services in the Control Panel and stop the EPSON Printer Status Agent service. Restart EPSON Status Monitor 2 and then restart the service. This procedure must be repeated every time you log on to Windows NT 4.0/3.51.

NetWare printers cannot be monitored.

Cause	What to do
You are using EpsonNet	You cannot use EPSON Status Monitor
WinAssist.	2 and EpsonNet WinAssist at the same
	time. Quit WinAssist and use EPSON
	Status Monitor 2. If you want to use
	WinAssist, quit EPSON Status Monitor
	2 first.

The printer port number is not set to 0 when using in Remote Printer mode.

Use the NetWare control tool to set the port number to 0.

14-12Troubleshooting