Configuring the interface card using EpsonNet WinAssist
Follow the steps below if the printer is a Remote (rprinter on IPX) connection.
Note:
❏The following configuration is not necessary if the printer is a Remote (LPR on IP) connection or Forward jobs to a Queue connection.
❏Be sure that the one of the following Client is installed in your computer; Novell Client 32, Novell IntranetWare Client, or Novell Client.
1.Turn on the printer with the interface card.
2.From any NetWare client, log in to the target NetWare server as an ADMIN.
3.Run EpsonNet WinAssist from the Start menu.
4.Click IPX. Select the printer you want to configure from the list, then click Configuration.