Configuring the interface card using EpsonNet WinAssist
Configure the interface card using EpsonNet WinAssist.
1.Turn on the printer with the interface card installed.
2.From any NetWare client, log in to the target NetWare server with supervisor privileges or ADMIN.
3.Load the print server from the file server’s system console which the print queue volume is set.
>LOAD PSERVER PCONSOLE or
>LOAD PSERVER print server name you set using
NWADMIN
4.Run EpsonNet WinAssist from the Start menu.
5.Click IPX. Select the printer you want to configure from the list, then click Configuration.
Note:
❏If you have connected more than one printer with the same type of interface card to the network, you can distinguish between the cards by the MAC address on the status sheet or the sticker on the interface card.
❏If the IP address is set to the default IP address, the printer model may not appear.