10BASE-T(C82362✽ only)

Connect the Ethernet twisted-pair (10BASE-T) cable to the RJ-45 connector on the interface card.

10BASE-T/100BASE-TX (C82363✽ and C82364✽)

Connect an Ethernet twisted-pair (Category-5) cable to the RJ-45 connector on the interface card. You can use this cable for both 10BASE-T and 100BASE-TX.

DC-IN connector (C82364✽ only)

Connect the AC adapter to the interface card.

cCaution:

❏Attach only one cable at a time.

❏For interface card models C82363✽ and C82364✽, use a Category-5 shielded twisted-pair cable to connect the interface card, to prevent malfunctions.

Power select switch

There is a power select switch on the board of interface card models C82363✽ and C82364✽.

cCaution:

The default position is at P for C82363✽, and at A for C82364✽. Do not change the position of the switch. You must use the default position. Otherwise, the interface card will not work correctly.

The power select switch for model C82363✽

1-4Getting Started