TCP/IP menu
You can configure the interface card for TCP/IP by making the necessary settings on the TCP/IP menu. See Chapter 2 for details.
Items | Explanations |
|
|
Get IP address | Select the method for acquiring IP addresses; Auto, |
|
|
| DHCP, BOOTP, RARP, or Manual. |
| 9 |
Set by PING | Check this box to enable IP address setting using |
| |
| the ping command. This check box is available |
| |
| only when Manual is selected for Get IP address. |
|
|
|
| ||
|
|
|
|
IP address | Set the IP address for the interface card. Be sure |
|
|
| that the IP address is unique and will not cause |
|
|
| conflicts with any other device on the network. |
|
|
Subnet mask | Set the subnet mask of the IP address. |
|
|
Default gateway | Set the gateway address. |
|
|
OK | Updates the settings. |
|
|
Cancel | Cancels any changes. |
|
|
Help | Accesses help. |
|
|
|
|
|
|
The EpsonNet Configuration Utility |