Launch Browser button:
Select the printer you want to configure, and then click the Launch Browser button. EpsonNet WebAssist will start to configure the interface card. EpsonNet MacAssist automatically closes when the browser launches.
Configuration button:
Select the printer you want to configure, and click this button to configure the interface card using EpsonNet MacAssist.
Quit button:
Exits EpsonNet MacAssist.
Setting menus
About passwords
The password is required to configure an interface card. When you click OK in the setting dialog box or click the Return to default button, the Password dialog box appears.
1.To set the password or when you want to change the current password, click Change.
2.In the Administrator password dialog box, enter a password (up to 20 characters) and click OK. Passwords are case sensitive.
Note:
❏The password is used for EpsonNet WinAssist, MacAssist, and WebAssist.
❏Since a new password will be effective after sending the data to the interface card, enter the old password right after changing the password.