Port Number:
Enter the port number of the proxy server.
Get Printer Attributes:
When you select this box and click OK, EpsonNet Internet Print communicates with the printer to acquire information, so it may take a few minutes before a message appears. This setting is available only when creating a port.
Get status every 20 sec.:
Select this box when you want to receive printer status updates at regular intervals (every 5 seconds during printing and every 20 seconds when idle). If you select this box, a message will appear if an error occurs during printing. You can also check the printer status by
OK button:
Saves the settings.
Cancel button:
Cancels any changes.
Note:
❏The settings can be changed after setting up the printer. In the printer’s Properties dialog box, click the Ports tab, and click the Configure Port button to change the settings.
❏Be aware that if you connect to the Internet using a
❏When you select the Get Printer Attributes check box and click OK, an error message might appear. Be sure that the printer’s power is on, and the printer is connected to the network.