3.Click TCP/IP under Network on the Configuration menu to view the TCP/IP setting screen.
Note: | 2 |
The network administrator must confirm any changes made to the | |
IP address settings. |
4.Select the "Get IP address" method from the following list:
Manual, RARP, BOOTP, or DHCP.
Note:
To use RARP, BOOTP, or DHCP, a server for each protocol is necessary. If there is no server which corresponds to the protocol, do not use it. See your server documentation for setting details.
5.Select ON or OFF in the Set by PING list box. Select ON to set the IP address with arp/ping commands. Select OFF when setting the IP address with EpsonNet WinAssist/MacAssist/ WebAssist to prevent unexpected changes of the IP address.
Setting the IP Address