6.Enter your password (up to 20 characters) and click OK to save settings. If you are entering a password for the first time, click Change and set a password. For more information about passwords, see “About passwords” on page 9-7.

Follow the on-screen instructions. After updating is complete, refresh the configuration by selecting Refresh from the View menu.

cCaution:

Since it takes 2 or 3 minutes to send new settings to the interface card, you must wait until the on-screen message appears before turning off your printer.

Configuring the interface card using EpsonNet WebAssist

You can configure the interface card for NetBEUI using EpsonNet WebAssist.

Note:

❏A web browser must be installed in your computer.

❏TCP/IP must be correctly set for the computer and interface card.

❏Do not operate EpsonNet WinAssist and EpsonNet WebAssist for the printer at the same time.

❏There are some restrictions on the characters you can use depending on your browser. For details, see your browser or OS manual.

1.Turn on the printer with the interface card.

2.Run EpsonNet WebAssist. Use one of the ways described way below.

❏Run EpsonNet WinAssist. Click the printer you want to configure from the list and click the Launch Browser button.

6-16Using the Interface Card with Windows 2000/NT