Changing the IP Address Using EpsonNet WebAssist
After you have configured the interface card for TCP/IP using EpsonNet WinAssist, MacAssist, or the arp/ping commands, you can make changes to the IP address or other settings using EpsonNet WebAssist (a utility that runs on your browser).
Note:
❏A web browser must be installed in your computer.
❏TCP/IP must be correctly set for the computer and interface card.
❏Do not operate EpsonNet WinAssist/MacAssist and EpsonNet WebAssist for the printer at the same time.
❏There are some restrictions on the characters you can use depending on your browser. For details, see your browser or OS documentation.
Follow the steps below to change the IP address using EpsonNet WebAssist.
1.Turn on the printer with the interface card.
2.Run EpsonNet WebAssist using one of the methods described below.
❏Run EpsonNet WinAssist or EpsonNet MacAssist. Click the printer you want to configure from the list and click the Launch Browser button.
❏Open your browser, and type in the IP address of the interface card directly. Do not run EpsonNet WinAssist or MacAssist.
URL: http:// the IP address of the interface card/
Example: http://192.168.100.201/