Making Status Monitor Settings

You can change the settings in EPSON Status Monitor 2 as described below.

1.Open the Run dialog box from the Start menu or the Control Panel depending on your system. Enter the path to the directory where you installed Status Monitor, followed by

Setup. Click OK.

When you have installed the program in directory ESM2 of drive C, type C:\ESM2\SETUP.

Note:

If you installed the program in a directory other than ESM2, enter the path to the directory instead of ESM2. If you installed the program in drive C, type C:\[path]\SETUP. Substitute the appropriate drive letter as necessary.

2. Follow the on-screen instructions.

Note for Win 2000, NT 4.0, and NT 3.51:

Users can individualize their own settings without affecting the settings of other users.

11

EPSON Status Monitor 2 (Windows only) 11-11