❏Deleting a queue

Select the print queue you want to delete, right-click it, and then select Delete Queue.

Queue list box:

List of queues that are assigned to the print server.

Add button:

Adds a queue to the print server. Browse the queue and then 3 click the Add button.

Remove button:

Remove a queue from the queue list box.

8.After making the settings, click OK. The Password dialog box appears.

9.Enter your password (up to 20 characters) and click OK to save settings. If you are entering a password for the first time, click Change and set the password. For more information about passwords, see “About passwords” on page 9-7.

Follow the on-screen instructions. After updating is complete, refresh the configuration by selecting Refresh from the View menu.

cCaution:

Since it takes 2 or 3 minutes to send new settings to the interface card, you must wait until the on-screen message appears before turning off your printer.

Note:

❏Since the new settings are sent to the interface card, you must wait until this message appears before turning off the printer.

❏Printer Objects (named PR0) are automatically created when you save the settings using EpsonNet WinAssist. Use PCONSOLE or NWADMIN to change the printer name.

Using the Interface Card with NetWare 3-9