❏When you select the Get Printer Attributes check box and click OK, an error message might appear. Be sure that the printer’s power is on, and the printer is connected to the network.
❏If the printer’s power is off or there is a problem with the network, the Get status every 20 sec check box is automatically cleared. If this happens, make sure that the printer’s power is on and the printer is connected to the network, then select the Get status every 20 sec check box again.
5.Click OK to save settings. If a message appears that says the settings are correctly configured, click OK and go to the next section "Adding printers".
Adding printers
1.Click Start, point to Settings, and then click Printers.
2.
3.Click the Local printer radio button and click Next.
4.Select the printer driver and click Next.
12
EpsonNet Internet Print Utility |