Note for Win 98/95:

The screen shown below does not appear in Windows 98/95.

9.Check the current settings and click Next. The installation program will start installing the necessary files. Follow the on-screen instructions.

10.When the Setup Complete dialog appears, select Yes and click Finish to restart Windows.

Selecting a Printer to Monitor

Before monitoring a LPR printer with EPSON Status Monitor 2, you need to select the printer in your operating system. Follow the steps for your operating system: Windows 95/98, “Setting Up Your Printer” on page 10-3; Windows 2000, “Printing via Standard TCP/IP Port Monitor in Windows 2000” on page 6-2; NT 4.0, “Printing via LPR port in Windows NT 4.0” on page 6-5; and NT 3.51, “Printing via LPR port in Windows NT 3.51” on page 6-6.

Note:

The interface card’s IP address must be set; otherwise the printer does not appear on the screen. For instructions on installing the card, see your printer’s documentation. For instructions on setting the IP address for the card, see Chapter 2.

11-10EPSON Status Monitor 2 (Windows only)