5.Click the TCP/IP tab to display the TCP/IP menu.
Note:
The network administrator must confirm any changes made to the IP address settings.
6.Select the "Get IP address" method from the following list:
Auto, DHCP, BOOTP, RARP, or Manual.
Note:
❏The default is Auto. When Auto is selected, DHCP, BOOTP, and RARP are available.
❏To use RARP, BOOTP, or DHCP, a server for each protocol is necessary. If there is no server which corresponds to the protocol, do not use it. See your server documentation for setting details.
❏If there are no DHCP, BOOTP, or RARP servers on your system or on your network, the interface card uses "192.168.192.168" as the default IP address.